Silver-palladium paste is a material used for manufacturing conductive circuits. Its fundamental principle lies in the conductive properties of silver and palladium, as well as their interaction within the conductive paste.

Electronic paste is one of the basic materials for electronic components. It serves as the foundation for manufacturing electronic components and thick film hybrid integrated circuits. Therefore, ensuring the quality of electronic paste is a key concern for both paste manufacturers and component manufacturers.

What is a resistance? Does capacitance have a unit? How is the resistance measured? How is the resistance of thick-film circuits designed? Is resistance the same as sheet resistance? What is the relationship between the two?

Conductive glue is a type of adhesive that becomes conductive after curing or drying. Now, let me tell you about some of the main applications of conductive glue.

Conductive glue is a type of adhesive formed by dispersing conductive particles in a resin matrix. After curing and drying, it has conductive properties similar to those of metals. Today, let's talk about the selection of silver particles in conductive glue.

Platinum paste, as a precious metal electronic paste, holds an extremely important position. The following is a discussion on the issues related to platinum paste.

The commonly used silver paste usually contains volatile substances such as mineral oil and various additives. The purpose is to ensure that the silver paste has good stability and dispersibility. Therefore, when storing the silver paste, proper sealing measures must be taken.

Precious metal resistive paste is a conductive paste made with precious metals as the conductive component, used for manufacturing thick film resistors. It is mainly used in thick film resistors, resistor networks, hybrid integrated circuits, as well as special-purpose resistors and electrodes.

The silver paste in conductive silver paste is a viscous paste composed of a mechanical mixture of high-purity (99.9%) metallic silver particles, adhesives, solvents, and additives.

The varieties of resist pastes are diverse and can be classified into various types. Today, we will introduce to you the main differences between resist pastes and conductor pastes.

The varieties of electronic pastes are extensive and can be classified into various types. Let's take a look at them together with Syera pastes.

Conductive glue is a type of adhesive that gains certain conductivity after curing or drying. In the electronics industry, conductive glue has become an indispensable new material. There are numerous varieties of conductive glue. Now, Sya Paste will give you a brief introduction.

With the continuous miniaturization of thick-film electronic products, the density of thick-film printed circuits has also been increasing. It is often required to print on both sides of the substrate and connect them together. Usually, the connection of the printed circuits on both sides of the substrate is achieved by using solder circuits or wire clamps to bypass the edge of the substrate.

If you have samples of good conductive paste, dielectric paste, resistive paste and electronic paste, and you want to know their components, through sample characterization pre-treatment - large-scale instrument analysis - engineer interpretation - verification of analysis results, a set of procedures can lead you to obtain the sample formula you desire.

In the 21st century, electronic information technology is developing towards miniaturization, high integration, high frequency and multi-dimensionalization. With the unprecedented popularity of electronic equipment applications and the increasingly complete automation of production technology, high power, small size, lightweight, multi-functionality, greenness and low cost have inevitably become the development directions of new electronic components.