Specification
|
product: |
Silver paste |
|
Part number: |
01L-2211 |
Application:
01L-2200 series, single group slurry , widely used in thin film switch, flexible printed circuit, laptop keyboard circuit, phone shielding keyboard circuit, multilayer printed circuit, RF interference shielding, RFID, toys, learning machine printed circuit and contact printing and other fields, in the alumina ceramic, microcrystalline glass ceramics, pet, PC, and other sheet can be used, can provide excellent electrical conductivity or adhesive film, has a good printing, oxidation resistance, flexible and strong adhesion, the conductive performance is not because of the occurrence of large offset printing process or product using the bending changes, screen printing, spray can.
Operating conditions：
|
Substrate |
Suitable for Ceramic, Pet, PI etc |
|
Method of use |
200-250 mesh stainless screen |
|
Levelling |
3-5min minutes at room temperature |
|
Curing conditions |
80-120℃，10-30 mins (For reference, the baking temperature and baking time can be set according to actual needs) |
|
Thinner |
ST-1001 |
Characteristics：
Paste Characteristics：
|
Characteristic |
Standard |
Test method and conditions |
|
|
1 |
Fineness |
≤15μm |
FOG test |
|
2 |
Viscosity |
80-220Pa.s |
Brookfield HBT utility cup and spindle (SC4-14/6R), 10rpm, 25±1℃， Brookfield HBT |
|
3 |
content |
70% |
Silver，Glue |
Characteristics after curing：
Check fired film produced under the conditions specified in 1）,
|
Characteristics |
Standard |
Test method and conditions |
|
|
4 |
Resistivity |
≤30mΩ/□ |
Cured film thickness 10-25μm, test pattern 100mm * 1mm |
|
5 |
Hardness |
2H |
Pencil hardness |
|
6 |
Adhesion |
Not fall off |
3M 600#Tape 90°Pull |
Storage condition and Term of validity
The product shall be guaranteed for 6 months after shipping date, keep tightly under at 5-15℃
Packaging method：
Standard package 1000g/can，if you need sample to test, available 200g with small package.
