Specification
|
product: |
Silver paste |
|
Part number: |
01L-2908A |
Application:
Single-component conductive paste series, one type is a quick-drying conductive silver paste for circuit repair. This paste has a wide range of application substrates (such as PET, glass, ceramics, etc., both soft and hard substrates), and has good compatibility with the substrates. The electrodes made with this paste will have a shiny and fine appearance after curing, and the structure is dense.
Operating conditions：
|
Substrate |
PI、glass、ceramic, metal, etc |
|
Method of use |
Dispensing ( by needle cylinder, etc.) |
|
Drying conditions |
After the construction, it can dry by itself in the air. (It usually dries on the surface within 10 to 30 minutes, and can be fully dried after 2 hours. The longer the time, the smaller the resistance of the connection.) If possible, the product can be baked at a temperature below 150℃; or by increasing the ventilation, the curing process can be accelerated. The specific baking temperature and duration can be set according to actual requirements. Generally, it takes 5 to 20 minutes. |
|
Thinner |
ST-1001 |
Characteristics：
Paste Characteristics：
|
Characteristic |
Standard |
Test method and conditions |
|
|
1 |
Fineness |
≤5μm |
FOG test |
|
2 |
Viscosity |
120-320Pa.s |
Brookfield HBT utility cup and spindle (SC4-14/6R), 10rpm, 25±1℃， Brookfield HBT |
Storage condition and Term of validity
The product shall be guaranteed for 3 months after shipping date, keep tightly under at 5-15℃
Packaging method：
Standard package 500g/can, sample package 200g/can
Notes:
a. After taking it out from the refrigerator, it should be left at room temperature until the temperature reaches equilibrium before being opened and used. (It is generally recommended to take it out 4 hours before use and place it at room temperature.)
b. This slurry contains organic solvents. During use, ensure good ventilation; avoid contact with eyes, skin or clothing, and keep away from fire sources or flammable substances.
If there is any contact, please clean it with a cleaning agent.
